MAKK Mod. ORKA 2128 HORIZONTAL CNC MACHINING CENTRE
The MAKK ORKA offers high quality solutions for your nesting and drilling applications, thanks to its robust structure and advanced configuration. It is equipped with a suction plate and servo motors. A tool change for 10 tools ensures fast processing. All axes are equipped with linear guides. Multiple separate suction zones ensure a stronger grip during operations.
For Milling, Drilling, Cutting, Nesting on Panels in:
– Alucobond®
– Dibond®
– Composite panels ACM
– Chipboard
– Particleboard Ennobled
– Multilayer
– Solid wood
– MDF
– Plexiglas
– Polycarbonate
– Plastic materials
– Corian®
– Etc.
CNC machining center for maximum precision and versatility…
Are you looking for a CNC machining centre that offers the highest precision, versatility and robustness?
Then look no further than MAKK ORKA, it is the ideal solution for your nesting, drilling, cutting and milling needs on multiple types of panels.
Here are some of the main advantages of the MAKK ORKA:
- Robust structure: The MAKK ORKA is made with a high quality steel structure that guarantees maximum stability and precision during processing.
- Advanced configuration: The MAKK ORKA is equipped with a number of advanced features, including an aspirating work surface, servo motors and intuitive control software.
- High cutting quality: The MAKK ORKA ensures precise and clean cuts on a wide variety of materials, including wood, plexiglass, methacrylate, ACM, composites and more.
- Versatility: The MAKK ORKA can be used for a wide range of applications, including furniture manufacturing, fixtures, signage, displays and more.
- Ease of use: The MAKK ORKA is equipped with intuitive control software which makes it easy to use even for less experienced operators.
TECHNICAL SPECIFICATIONS…
Operating dimensions: mm 2800 2100
Machine dimensions (useful area): mm 4000×2850 (with control panel, PC and all side components)
Z axis dimension: mm 140
Total machine weight: kg 2600
EU voltage: 400 V/three-phase/50 Hz
Worktop material: Phenolic (compact)/12 mm
Automatic vacuum zones: 6
Material positioning pins: 5 pcs. automatic pop-up pins with sensors to avoid collisions
Automatically lubricated linear guides: 25 mm linear guide rails
Tool length measurement: automatic
Shaft motor power: kW 8.5/11
Rev/min shaft motor: 24000 rev/min
Automatic tool change: Std 10 pcs. tool holder with sensors to avoid collisions
Tool holder: HSK 63F (4 pcs. HSK 63F tool holder are included in the machine)
Type: dry
SCHNEIDER SERVO MOTORS FOR 3 AXIS…
motor axis X: Schneider BMH1003P16A2A kW 1.30
motor axis X1: Schneider BMH1003P16A2A kW 1.30
motor axis Y: Schneider BMH1003P16A2A kW 1.00
motor axis Z: Schneider BMH0702P16F2A kW 0.7
SPEED AXIS…
X-axis speed: m/min 70
Y-axis speed: m/min 70
Z-axis speed: m/min 20
Air pressure: 8 bar (minimum)
Components CNC MACHINING CENTER MAKK ORKA 2128
Simple maintenance with spindle kit management.
Drilling and threading possible.
Maximum power from 6000 rpm
– Model: QE-1F 8.5/12 24 63F
– Maximum power S1/S6: 8.5/11 kW
– Rated power: 12000 U/min
– Max rotation speed: 24000 U/min
– Maximum torque S1/S6: 13.5/16.7 Nm
– Current S1/S6: 22/23 A
– Voltage/ frequency: 380V / 50-60 Hz
– Type of electromancer: 4-pole synchronous
– Weight: 151.0 kg without engine
– Tool taper HSK 63F
– Type of tool holder Automatic
– Ceramic bearings – oil lubrication for long life
– Cooling Electric fan
– Sensors S1 (tool handle) – S2 (open gripper) – S3 (shaft rotation)
– Pneumatic double acting release cylinder
– Other specifications 4-pole synchronous – pressurized maze
(*4 pcs. HSK 63F tool holder are delivered with Vesta CNC milling machine)
iM SMART SENSOR (optional)…
Speed, vibration and temperature of the bearings and core of the spindle directly to the PC (link).
The iM Smart sensor monitors vibrations and core temperatures of the spindle independently of normal machine vibration and alarms for unusual activities of the spindle motors.
– Accelerometer: Triaxial with 3 orthogonal axes X, Y and Z
– Sensor type: MEMS
– Measuring range: 16 G (156 m/sec 2)
– Bandwidth: 1000 Hz
– Resolution: 0.125 g/sample
– Operating temperature: 5 to 85°
– Impact resistance: 3000 G (29400 m/sec 2)
– Connectivity: Modbus over RS485
VPS DRY VACUUM PUMP
The VPS K250 dry run, designed to operate in continuous service. It uses self-lubricating graphite composite vanes, requires only minimal maintenance and does not require oil change.
– Model: VPS K250
– Volume flow 50 hz: 250 m 3/h
– Absolute vacuum 50 hz: 200 mbar
– Power 50 hz: 7.5 kW
– Noise level 50 hz: 79.0 dB(A)
– Volume flow 60 hz: 286 m 3/h
– Absolute vacuum 60 hz: 200 mbar
– Power 60 hz: 9.0 kW
– Noise level 60 hz: 79.0 dB(A)
– Weight: 260,0 kg without engine
• 100% dry operation (without oil)
• Silent operation
• Air cooled
• Direct drive to single shaft
• Compact design
• Variety of engines available
• Low operating and maintenance costs
• No cycling hours
• Space-saving footprint
• Simple construction for quick and easy on-site service to reduce downtime
SERVO DRIVE FOR 3 AXIS INOVANCE…
– Model: SV660N
– Product or component type: Servo drive
– Phase: Three-phase
– Nominal supply voltage [EU]: 380…440 V – 10…+ 10 %
– Rated supply voltage [USA]: 220… 240 V – 10…+ 10 %
– EMC filter: Integrated
– Supply voltage limit [EU]: 323…528 V
– Supply voltage limit [USA]: 170… 264 V
– Frequency supply: 50/60 Hz – 5…5 %
SERVO DRIVE FOR 3 AXIS INOVANCE…
– Model: MS1H1-10C30CB-A331Z-INT [axes X1 and X2]
– Product or component type: Servo motor
– Rated speed (rev/min): 1500
– Nominal torque (N-m): 8.34
– Shaft end: Grooved + threaded hole
– IP protection grade: IP67 standard
– Electrical connection: Connectors spec. Military
– Model: MS1H1-10C30CB-A331Z-INT [y-axis] / MS1H1-10C30CB-A334Z-INT [z-axis]
– Product or component type: Servo motor
– Rated speed (rev/min): 3000
– Nominal torque (N-m): 3.18
– Shaft end: Grooved + threaded hole
– IP protection grade: IP67 standard
– Electrical connection: Connectors spec. Military
– Speed axis X: 70 m/min
– Speed Y axis: 70 m/min
– Speed Z axis: 20 m/min
DRILLING UNIT HITECO (optional)…
• Point lubrication for each spindle to increase service life
• Quick spindle replacement in just a few simple steps
• Unique dust protection system
– Model: TF.A.9V.0H.0B.A
– Number of vertical shafts: 9
– Tool taper: 10 H7 mm
– Tool distance: 32 mm
– Max. tool length: 70 mm
– Vertical shaft travel: 60 mm (opz. 75 mm)
– Engine power: 1.5 kW
– Max. vertical rotation: 8000 rpm
– Weight: 25 kg
AUTOMATIC SUCTION ZONES…
The machine work surface is divided into 6 asymmetric vacuum zones.
More vacuum zones provide a stronger grip during cutting.
The suction zones are controlled by software and activated separately and automatically according to the panel size on the worktop.
LINEAR TOOL CHANGE UNIT…
The automatic linear tool changer improves the production and transport capacity of the Orka CNC router by changing tools very quickly without the help of a manual operator.
In this way, the unit reduces downtime on a given project.
There are sensors for each linear tool change caliper to prevent collisions.
(*Tool change numbers are 10 on Orka 2128).
RETRACTABLE MATERIAL POSITIONING PINS…
The automatic, concealed material positioning pins are controlled manually via the machine’s software interface.
Each retractable pin has sensors to avoid collisions.
PRESS ROLLERS (optional)…
Dynamic and position press rollers for cutting small parts and also cutting multiple boards at the same time.
TWIN AGGREGATE AND C-AXIS HITECO SYSTEM (optional)…
With the dual ER25 and ER32 connection, the Hiteco Twin Aggregate system offers a special application for door hinge and flap milling operations. The aggregate unit on the Orka CNC router comes with the Hiteco C, 6 suction cups, 5 pop-up stops. in the work table, as a complete set. The C-axis is the fourth additional axis for the milling machine, making the machine available for 4-sided door machining.
– Model: TWIN H:100
– Spindle coupling: HSK63F
– Spindle speed: max. 10850/min
– Tool speed: max. 15500/min
– Type of clamp: ER32 + ER35
– Tool shank diam. ER32 2-20 / ER35 2-16
– Weight: 4.7 kg
SPECIFICATIONS OF THE HITECO C-AXIS
– Model: 29L0181872B
– Total reduction rate: 1:100
– Nominal input torque: 0.95 Nm
– Maximum input torque: 3.82 Nm
– Nominal speed in input: 3000 U/min
– Max. input speed: 5000 U/min
– Servo motor: Innovance MS1H1 0.4 kW
– Weight: 14 kg
CAD/CAM SOFTWARE AND CNC CONTROLLER…
Alphacam 3D CAD/CAM software.
Alphacam is a separate program not installed on the existing CNC controller.
Alphacam can be used by installing it on the computer connected to Vesta or on a separate computer.
The cutting simulation is available in Alphacam and in the Vesta software interface.
The machine is equipped with a developed interface and the machine controller is powered by Codesys.
OPTIONAL ON DEMAND:
DOWNLOAD THE CATALOGUE
MORE INFORMATION?
HORIZONTAL CNC MACHINING CENTRE MAKK Mod. ORKA 2128
Retractable panel positioning pins
Panel working group sliding guides
Electro-spindles for milling, drilling, cutting
Automated tool storage
Vacuum worktop zones
PC for Machine Control
